MANIFOLD HARDWARE

Fittings

How your fluidic manifold connects to the rest of your device can be as important as the manifold design itself. You can rely on Controlled Fluidics engineers’ recommendations for fittings that make successful, long-lasting, leak-resistant connections. Browse through the many options and contact us to benefit from our expertise.

Barbed Straight Fitting

Barbed Straight

  • 10/32 External Thread
  • Buna-N O-Ring
  • 303 Stainless Steel
Barbed Elbow Fitting

Barbed Elbow

  • Adjustable Position Elbow
  • 10/32 External Thread
  • Buna-N O-Ring
  • 3-3 Stainless Steel Body/Slotted Stud
Barbed Elbow Low Profile Fitting

Barbed Elbow - Low Profile

  • Low Profile Adjustable Position Elbow
  • 10/32 External Thread
  • 2 Buna-N O-Rings
  • 303 Stainless Steel

Inserts

The ability to inspect and clean your fluidic manifold can increase its useful life but may require occasional removal and re-installation of the valves from the manifold. The use of threaded inserts (versus the more typical threaded holes) can reduce wear and potential thread failure from frequent disassembly. Controlled Fluidics recommends inserts be used in #2 or smaller threads

Browse to learn what benefits our inserts can bring to your plastic manifold design.

Tapered Brass Inserts

Tapered Brass Inserts

  • Tapered
  • Thru-threaded
  • Unified
  • For use in tapered holes
  • Tapered mounting hole allows for rapid/accurate alignment prior to installation
Symmetrical Brass Inserts

Symmetrical Brass Inserts

  • Symmetrical
  • Thru-threaded
  • Unified
  • For use in straight or tapered holes