When should I choose Delrin AF over standard Delrin for OEM parts?

Choose Delrin AF when your part is a bearing, bushing, gear, cam, or sliding component where friction, wear life, and “run-dry” capability are primary design constraints and not just general strength and stiffness. The PTFE-filled structure of Delrin AF provides significantly lower friction and better wear performance than unfilled Delrin while retaining most of the base resin’s strength. This tends to make it a better fit for high-duty motion components that see continuous cycling or higher speeds.

What tolerances can you hold on Delrin AF components?

In practice, Delrin AF machines well with standard metalworking equipment, and experienced shops routinely achieve tolerances on the order of ±0.004 inches on turned and milled features under controlled conditions. For OEM designs, the achievable tolerance window will depend on part geometry, wall thickness, and how the part is configured and inspected. In this case, it is best to send a drawing or model for a design-for-manufacturability review before finalizing the print

Can Delrin AF replace bronze or steel bushings in my design?

Delrin AF can replace bronze or steel bushings when operating loads, speeds, and temperatures fall within Delrin AF’s design envelope. Engage our engineers to review your PV and environment before finalizing a material change.

Back to the product list

DELRIN AF MACHINING FOR HIGH-WEAR OEM COMPONENTS

SELF-LUBRICATING ACETAL FOR METAL REPLACEMENT IN GEARS, BUSHINGS, & OTHER HEAVY DUTY PARTS FOR OEM DESIGNS

When you need a strong plastic that mimics the properties of metal, Delrin AF may be the perfect solution. Delrin AF components machined for OEMs can take the place of metal parts with metal-like strength, low friction, and long service life in demanding environments.

Ideal for replacing bronze and steel in gears, bearings, and bushings while reducing weight and virtually eliminating the need for external lubrication.
Tight-tolerance CNC machining for production volumes from pilot runs to ongoing OEM supply.
Consistent performance in mechanical, electrical, chemical, and environmental applications across a wide temperature range.

Is Delrin AF right for your project? Get a DFM review and find out today!

Key Facts about Delrin AF

Extremely low friction and wear
Chemical resistance
Good dimensional stability
Natural lubricity
Outstanding fatigue endurance
Wide end-use temperature range
Good electrical insulating characteristics

Delrin AF is a highly versatile plastic material with metal-like properties. Thanks to its chemical resistance, natural lubricity, and wide end-use temperature range, Delrin AF is well suited for projects in a wide variety of industries and operating environments. It is especially useful for components that require lubrication but must function without grease or oil.

Typical OEM Components Using Delrin AF

These applications benefit from lower wear, quieter operation, and reduced lubrication compared to metal alternatives.

Mechanical Systems: Gears, bearings, bushings, cams, and pump impellers for motion control, conveyor systems, and fluid handling equipment.

Electrical & Electromechanical: Switch components, counter frames, and insulating structural parts in electromechanical assemblies.

Chemical & Fluid Handling: Pump and beverage valve components, softener internals, and chemical sprayer parts where chemical resistance and low friction are necessary.

Environmental & Transportation: Marine fittings, fuel senders/modules, and HVAC blower components exposed to vibration, moisture, and temperature swings.

GRADE	PROCESSING METHOD	PROCESS CHARACTERISTICS	PRODUCT CHARACTERISTICS	APPLICATIONS
100AF	Extruded, Injection Molded	High viscosity resin used in easy-to-fill molds. PTFE fibers added to resin.	Maximum unmodified toughness Extremely low friction and wear	Bearings Bushings Cams Other anti-friction devices that see repeated load.

Recommended when you need self-lubricating performance under load and sliding contact.

Supports tight-tolerance machining with good dimensional stability over a wide service temperature range

Need Pricing For A Custom Delrin AF Component?

Get a clear, accurate quote tailored to your project.

Get Your Custom Quote Now

REACH OUT TO US

DELRIN AF MACHINING FOR HIGH-WEAR OEM COMPONENTS

KEY FACTS & MORE ABOUT DELRIN AF

Key Facts about Delrin AF

Typical OEM Components Using Delrin AF

WHY OEMs CHOOSE DELRIN AF

Delrin AF Machining for OEM Programs

DELRIN AF MATERIAL & MACHINING DATA

DELRIN AF PLASTIC VIDEOS

Custom Plastic Manufacturing Services

Featured Markets & Applications

Resource Center

Ingersoll-Rand Family of Companies: